ENENGLISH
5.6.1 Separate blades
The blades are replaceable. When replacing, both blades on the same blade bar must be replaced to avoid imbalance.
Tightening torque: Screws (27:P) - 24 Nm Shear bolts (27:Q) - 9.8 Nm
In the event of a collision, the shear bolts (27:Q) can break and the blades bend back. If this has hap- pened, install genuine shear bolts and tighten as above.
5.6.2 Full blade, fig. 28-29
The full blade is replaced when the edges are worn. Install the new blade with the punched text facing down.
Tightening torque:
110 Combi Pro | 24 Nm |
125 Combi Pro | 45 Nm |
5.7 Synchronising, blades
The following decks have synchronised blades:
•92/107 M
•107 M HD
•121 M
If one of the blades has struck a solid object (e.g. a stone), the positive drive belt may mesh incorrect- ly, endangering the synchronisation. This entails a risk of the blades colliding with each other.
Correctly synchronised blades must be offset 90° from each other. See fig. 30.
Always check synchronisation after a collision. If there is any suspicion of incorrect synchronisa- tion, contact an authorised Stiga workshop for re- pair work to be carried out.
The blades in the 110/125 Combi Pro are freely ro- tating.
5.8 Wear protection
There are two wear protection devices on the un- derside of the cutting deck to protect it. These can be replaced if necessary.
6 SPARE PARTS
STIGA genuine spare parts and accessories are de- signed specifically for STIGA machines. Please note that
The use of such parts and accessories can affect the function and safety of the machine. STIGA accepts no responsi- bility for damage or injuries caused by such products.
7 DESIGN REGISTRATION
This product or parts thereof is covered by the fol- lowing design registration:
Sweden: 66 166
Germany: 499 11 740.9
France: 577
USA: 435 564
GGP reserves the right to make alterations to the product without prior notification.
38
