Installation
LC to LC Duplex
FC cables
Note: Refer to StorageTek’s Interop Tool for the latest connectivity information. See page 2.
If necessary, refer to FlexLine’s hardware and software Installation Guides, or to BladeStore’s Installation, Operation, and Maintenance Guide, P/N 96080 for detailed installation information.
Refer to the Control Module/Array Module/Drive Module User’s Guides for servicing information.
Note: The Hardware Cabling Guide provides cable routing information for most FlexLine 200/300 Series storage system solutions. It help you route the drive interface cables to the drive module ESMs.
Refer also to the F40 Cabinet User’s Guide, P/N 96100, and to the Installation and Mounting Supplement, P/N 95972. These manuals can be found on the CRC and on the engineering web page at:
http://gandalf.stortek.com/ctp/cabinet/
The following BladeStore configuration drawing should help you route drive interface cables to blade modules (blade trays). This is the only storage system not covered in the Hardware Cabling Guide. This information will help you do an installation into a
Note: You should always make sure that there are two sets of redundant loops (as shown in the following BladeStore example).
96126 | Second Edition | 9 |
| StorageTek Proprietary |
|
