StorCase Technology DE100i-A100 manual Connector J2, AT/IDE Interface Signals Pin

Installation 13

I/O Connector J2

The I/O connector (J2) pin assignments are as follows:

Table 2: AT/IDE Interface Signals

Pin	Signal	I/O	Pin	Signal	I/O
01	Host Reset-	O	02	Ground
03	Host Data 7	I/O	04	Host Data 8	I/O
05	Host Data 6	I/O	06	Host Data 9	I/O
07	Host Data 5	I/O	08	Host Data 10	I/O
09	Host Data 4	I/O	10	Host Data 11	I/O
11	Host Data 3	I/O	12	Host Data 12	I/O
13	Host Data 2	I/O	14	Host Data 13	I/O
15	Host Data 1	I/O	16	Host Data 14	I/O
17	Host Data 0	I/O	18	Host Data 15	I/O
19	Ground		20	Key	No Pin
21	DMARQ	O	22	Ground
23	DIOW-	O	24	Ground
25	DIOR-	O	26	Ground
27	Reserved		28	Reserved
29	Reserved		30	Ground
31	IRQ 14	I	32	Host IO16-(AT)	I
33	Host ADDR 1	O	34	PDIAG- (16)	Notes
35	Host ADDR 0	O	36	Host ADDR 2	O
37	Host CS0-	O	38	Host CS1-	O
39	DASP-	Notes	40	Ground

- Indicates an active-low signal.

Signal direction is with respect to the host. "I" indicates To the host

"O" indicates From the host

The /PDIAG and /DASP signals are used for communication between master, slave, and the host.

DE100i-A100 User's Guide - Rev. C02 StorCase Technology, Inc.