Stovax (P)8119**UC Installation Instructions, Site Requirements, Appliance Location, Model, Width

Models: (P)8127**UC (P)8119**UC (P)8128**UC (P)8135**UC (P)8143**UC (P)8144**UC (P)8136**UC (P)8120**UC

1 32
Download 32 pages 4.17 Kb
Page 14
Image 14
4.APPLIANCE LOCATION

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

4.APPLIANCE LOCATION

4.1This appliance must stand on a non-combustible hearth that is at least 12mm thick.

4.2It must be fitted into a non-combustible opening.

4.3These appliances must be hearth mounted into a fireplace opening conforming to National Standards.

4.4The appliance must be firmly fixed to the hearth.

4.5Ensure that no naked flame or incandescent part of the fire bed projects beyond the vertical plane of the fireplace opening.

4.6The appliance must not be installed in any room that contains a bath or shower.

4.7Ensure clearances to combustible materials. See diagram 2.

4.8The following table indicates the minimum opening sizes for each model. In each case, a gap of 20mm has been allowed to both Left and Right of the basket. See diagram 3.

3

MODEL

WIDTH
DEPTH

 

 

 

SMALL ASPEN

640mm

400mm

SMALL CHAMONIX

 

 

 

 

 

MEDIUM CHAMONIX

690mm

350mm

 

 

 

LARGE ASPEN

790mm

500mm

LARGE CHAMONIX

 

 

 

 

 

TAHOE

670mm

300mm

 

 

 

5.CONTROL UPGRADE

5.1This appliance is supplied with a control valve that can be easily upgraded to battery powered remote control. This upgrade can be fitted by anyone capable of simple DIY jobs and requires no special training. This upgrade can be obtained through your local GAZCO stockist.

5.2STANDARD REMOTE CONTROL This remote control can control the fire after the pilot has been lit. It can turn the main burner on and regulate it from low through to high and back again. It can turn the main burner off leaving the pilot burning. GAZCO PART NUMBER 8455.

14

Page 14
Image 14
Stovax (P)8119**UC Installation Instructions, Site Requirements, Appliance Location, Control Upgrade, Model, Width, Depth