PORTO-SCREED PSH — RULES FOR SAFE OPERATION
■Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.
■NEVER Run engine without air filter. Severe engine damage may occur. Service air filter frequently to prevent carburetor malfunction.
■AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts as this can cause a serious injury.
■ALWAYS keep clear of rotating or moving parts while operating the PSH.
■Moving Parts – Shut down the engine before performing service or maintenance functions. Contact with moving parts can cause serious injury.
■ALWAYS clear the work area around the screed of debris and obstructions to prevent tripping and/or falling onto the screed.
■NEVER leave the machine unattended while running, even for a brief moment. DO NOT leave the screed until it comes to a complete stop.
■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
■ALWAYS use factory authorized parts for replacement.
■Refer to the HONDA Engine Owner's Manual for engine technical questions or information recommended by the manufacturer for this equipment. Damage to the equipment and/or injury to user may result.
■No one other than the operator is to be in the working area when the
■Always observe all applicable compulsory regulations relevant to environmental protection, especially, fuel storage, the handling of hazardous substances, and the wearing of protective clothing and equipment. Instruct the user as necessary, or, as the user, request this information and training.
Transporting
■ALWAYS shutdown engine before transporting.
■Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.
■Drain fuel when transporting PSH over long distances or bad roads.
■When placing the PSH inside a
■ALWAYS use proper lifting techniques when moving the PSH.
Maintenance Safety
■NEVER lubricate components or attempt service on a running machine.
■ALWAYS allow the machine a proper amount of time to cool before servicing.
■Keep the machinery in proper running condition.
■Fix damage to the machine immediately and always replace broken parts.
■Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.
■DO NOT use food or plastic containers to dispose of hazardous waste.
Emergencies
■ALWAYS know the location of the nearest fire extinguisher.
■ALWAYS know the location of the nearest and first aid kit.
■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
PAGE 10 — STOW
