Studer Innotec HPC 2800-12, HPC 4400-24, HPC 6000-48, HPC 8000-48

STUDER INNOTEC

HP-COMPACT

4 Control

4.1Display and control parameters

HP-COMPACT V5.4

14/80

Image 12

Studer Innotec HPC 2800-12, HPC 4400-24, HPC 6000-48, HPC 8000-48 manual Control, Display and control parameters

Contents

Sine wave Inverter, Battery charger, Transfersystem HP-COMPACT HPC HP-COMPACT Quality and Warranty Warranty DisclaimerGeneral Information Operating instructions Special precautions Liability Disclaimer Principle schematic Introduction Description of the main functions Battery connecting Mounting and installing Installation placeFixing Connections Pre-installation settings Cabling Connection to battery 3.6.1.1 On the appliance side Connection to Remote control Connection to Temperature Sensor TempConnection to the 230Vac-consumer appliances AC Output Connection to the 230Vac Input AC Input Control Display and control parameters Light Emitting Diodes LED LED Push buttons Turning KnobsInverter Charge detection system „Standby Battery Condition Overheating Over Temp Battery charger Default values for battery voltage thresholdsCycle of charge Equalization charging Input current repartition Power sharing Set the Input LimitCharging current Transfer system Fast UPS- Mode for the Transfer Switch Delayed mode of the Transfer SystemMultifunctional Contact Set the transfer voltage threshold Remote Control RCC-01 HP-COMPACT Remote control for „Power Sharing RPS-01 Standard settingProgramming Reset value default settings Battery voltages and absorption timeSet the voltage and timing threshold Auxiliary contact Table of voltage and timing thresholdPrinciple Programming of the Auxiliary Contact Power cut of the second priority loads Manual operating of Auxiliary Contact Installation Maintenance Diagram of the different modesDisabling some of the HP-COMPACT functions Declaration of CE Compliance Technical Data