Sub-Zero Freezer installation instructions To O L S a N D M AT E R I a L S R E Q U I R E D

BUILT-INI N S TA L L AT I O N R E C O M M E N DAT I O N S

INSTALLATION R E C O M M E N DAT I O N S
The importance of the installation of the	TO O L S A N D M AT E R I A L S R E Q U I R E D
Sub-Zero Built-In unit cannot be overempha-	The following is a list of tools and materials
sized. Installation should be done by a
	that should be available for proper installation.
qualified installer.
Before you begin the installation process, it		Phillips screwdriver set
is recommended that you read this entire
Installation Instructions book. There are key		Slotted screwdriver set
details that you should take special care to		Torx drive screwdriver set
observe during the installation. By reading
these instructions carefully, you will make the		4' (1.2 m) of 1/4" copper tubing and saddle
installation process easier, problem-free and,		valve for the water line—part #4200880
most importantly, safe.		(do not use self-piercing valves)
Any questions or problems about the		Copper tubing cutter
installation should be directed to your		Level—2' (.6 m) and 4' (1.2 m) recom-
Sub-Zero dealer or the Sub-Zero Customer
		mended
Service Department at 800-222-7820 or e-mail
		Appliance Dolly able to support 700 lbs
customerservice@subzero.com. You can also
visit our website at subzero.com.		(317 kg) and adequate manpower to
		handle the weight of the unit
		Various sized pliers
		Wrench set
		Allen wrench set
		5/16" hex bolt nut driver
		Crescent wrenches
		Cordless drill and assorted drill bits
		Masonite, plywood, 1/8" pressed fiberboard,
		cardboard or other suitable material to
		protect finished flooring
		Appropriate materials to cover and protect
		the home and its furnishings during instal-
		lation

Dimensions in parentheses are in
millimeters unless otherwise specified.	3