Chapter 4 - Repairs and Replacements

Seal Strip Retainer and Seal Strip

Refer to Tables 3 and 4 for Part Numbers

The following instructions cover both the seal strip retainers and the seal strips. All seal strip retainers are the same except for length and number of mounting holes. The same is true for all seal strips.

Parts Identification

Table 3 on Page 27 and Table 4 on Page 28 give the part numbers for the various seal strip retainers and seal strips.

Note: The dimensions refer to the door/cage size, and not to the actual lengths of the retainers and seals.

Tools Required

„3/8 in. box-end or open-end wrench

„Phillips screwdriver

Procedure

Note: You do not have to remove the door from the cage to replace a seal strip retainer or a seal strip.

1.Open the oxygen therapy door.

2.With a 3/8 in. wrench and a Phillips screwdriver, remove the mounting nuts and screws (Figures 29 and 30) that hold the seal strip retainer and seal strip to the door.

Note: The number of mounting screws/nuts varies with the dimensions of the door.

Seal Strip

Mounting Screw

Mounting

Seal Strip

Nut

 

Seal Strip Retainer

Figure 29. Outside View - Seal Strip and

Figure 30. Inside View - Seal Strip

Retainer Mounting Screws

Retainer and Seal Strip

3.Lift off the seal strip retainer.

4.If you are replacing the seal strip, remove it at this time.

26

SSCI - Suburban Surgical Company, Inc.

Page 30
Image 30
Suburban Mfg 12155-00-EPFNAA, 12155-00-FNHJAA Seal Strip Retainer and Seal Strip, Refer to Tables 3 and 4 for Part Numbers