Owner’s Manual - Oxygen Therapy Door
Extension
Cotter Pin
Figure 6. Nebulizer
Disposition of the Shipping Carton
Figure 7. Nebulizer in Place
6.On the nebulizer extension, squeeze the two ends of the cotter pin together and remove the pin from the extension (Figure 6).
7.Open the oxygen therapy door.
8.Place the nebulizer in the ice tray with the extension through the opening in the door (Figures 5, 6, and 7).
9.Inside the door, replace the cotter pin through the extension to hold the nebulizer in place and spread the two cotter pin ends apart to keep the pin from falling out.
10.Attach the free end of the nebulizer plastic tubing to a 50 psi wall oxygen outlet or an oxygen cylinder.
Note: Your oxygen supplier is the best source to make this connection for you.
Installation and setup is complete.
Your SSCI Oxygen Therapy Door is now
ready for use.
The shipping carton can be cut up and thrown away. If adequate space is available, however, it might be handy to retain the carton in case reshipment of the door to the manufacturer ever becomes necessary for repairs.
Form No. 702703 Rev. E August, 2006 | 9 |
