Owner’s Manual - Oxygen Therapy Door
Chapter 5 - Troubleshooting
Warning: Oxygen is a highly combustible gas. Avoid the use of open flames, smoking materials, or equipment capable of producing sparks in any area in which oxygen is being used.
Before servicing or performing maintenance on the oxygen therapy
door, make sure the oxygen supply is turned off at the source.
General
The following procedures will help you fix most of the problems that you might encounter with the Oxygen Therapy Door. If necessary, please feel free to call SSCI Customer Service at (800)
For more information on contacting SSCI, refer to SSCI Contact Information on Page 5.
Part numbers for available replacement parts are shown in Table 2 on Page 17. To order replacement parts, refer to Parts Ordering Procedure on Page 18.
Possible problems are listed below along with their page references:
| There is no oxygen flow into the | Page 31 |
| There is excessive oxygen leakage from the cage. | Page 32 |
| The door does not close or latch | Page 33 |
| One or both of the gauges does not read correctly. | Page 34 |
Page numbers shown in the Remedial Action sections direct you to
If your oxygen therapy door must be returned to SSCI for repairs, refer to Returning the Oxygen Therapy Door for Repairs on Page 30 for directions.
Form No. 702703 Rev. E August, 2006 | 29 |
