Suburban Mfg 12155-00-DRDRAA, 12155-00-FNHJAA, 12155-00-FNFNAA manual Procedures, Tool Required

Owner’s Manual - Oxygen Therapy Door

Procedures

Nebulizer Assembly, Complete

P/N 212126

This is the complete nebulizer assembly including the bottle, cap, regulator, extension, cotter pin, hose barb fitting and oxygen supply hose (Figure 18).

Tool Required

„Needle-nose pliers

Hose Barb

Fitting

Extension

Regulator

Cap

Oxygen	Cotter Pin
Supply Hose	Bottle

Figure 18. Nebulizer Assembly, Complete

Procedure

1.On the nebulizer extension, use a needle-nose pliers to squeeze the two ends of the cotter pin together, then remove the pin from the extension (Figure 19).

2.Open the oxygen therapy door.

3.Place the nebulizer in the ice tray with the extension through the opening in the door (Figures 19 and 20).

4.Inside the door, replace the cotter pin into the extension to hold the nebulizer in place and spread the two cotter pin ends apart to keep the pin from falling out.

Form No. 702703 Rev. E August, 2006 19