Sun Microsystems SG-XPCIE2FCGBE-E-Z manual To Remove the HBA Hardware

1. Use the cfgadm command to identify the HBA to be removed.

cfgadm
Ap_Id	Type	Receptacle	Occupant	Condition
pcie5	fibre/hp	connected	configured	ok
pcie6	fibre/hp	connected	configured	ok

2.Use the cfgadm -c unconfigure command to unconfigure the attachment point ID (Ap_Id) for the HBA.

3.Use the cfgadm -c disconnect command to prepare the HBA for removal.

A flashing Power indicator LED indicates that the HBA is being prepared for removal. A dark Power indicator LED indicates that the HBA is ready to be removed.

▼To Remove the HBA Hardware

1.Disconnect all cables.

2.Press the HBA latch to disengage the HBA, and then pull forward and down to eject it.

You can now remove the HBA.

20 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008