Sunbeam BT4400 manual Using your Bake & Grill, To bake or roast, To grill, To toast

Models: BT4400

1 24
Download 24 pages 21.44 Kb
Page 10
Image 10

Using your Bake & Grill

Position the oven on a dry, level surface, ensuring that the ventilation slots on the side and top of the appliance are not obstructed. Plug the power cord into a 230-240 volt power outlet and turn the power on.

Note: When turned on for the first time, your Bake & Grill may give off vapours for up to 10 minutes. This is due to the initial heating of the materials used. It is safe, not detrimental to the performance of the oven and will not reoccur.

Important: Do not force open the oven door beyond its limit or let the door drop open as this will distort the doors ability to maintain a proper seal.

To bake or roast

The top two and bottom two elements will heat when the 'Bake' setting has been selected.

1.Place the wire rack, in either the raised or sunken position, into the desired rack support guide.

2.Place the food to be baked on the wire rack, using the appropriate pan, tray etc.

3.Turn the oven setting to ‘Bake’.

4.Select the desired temperature on the temperature control.

Note: For best results, allow the oven to preheat for 5 -10 minutes or as per recipe instructions.

Important: If baking cakes, biscuits etc, using recipes other than those provided with this instruction booklet, it is recommended that oven temperatures for the 'Bake' setting be reduced by approximately 20-30°C. The recipes in the back of this book have already been adjusted.

5.To turn the oven on, turn the timer control to the desired time. Alternatively, for continuous operation, turn the timer control to the ON position.

6.When finished baking, the oven will switch off automatically and a bell will sound if the timer was selected. Alternatively, turn the timer control to OFF position if the continuous mode was selected.

To grill

The top two elements will heat when the 'Grill' setting has been selected.

1.Place the wire rack, in either the raised or sunken position, into the highest rack support guide.

2.Place the drip tray inside the baking pan and position the food on the drip tray. Place the baking pan on the wire rack.

3.Turn the oven setting to ‘Grill’.

4.Set the temperature control to maximum 240ºC.

Note: For best results, allow the oven to preheat for 5 -10 minutes or as per recipe instructions.

5.To turn the grill on, turn the timer control to the desired time. Alternatively, for continuous operation, turn the timer control to the ON position.

6.When finished grilling, the oven will switch off automatically and a bell will sound if the timer was selected. Alternatively, turn the timer control to OFF position if the continuous mode was selected.

To toast

The top two and bottom two elements will heat when the 'Toast' setting has been selected.

1.Place the wire rack into the middle rack support guide, in the sunken position, for the BT5300 and into the top rack support guide in the raised position for the BT4400.

2.Arrange bread on the wire rack.

3.Turn the oven setting to ‘Toast’.

8

Page 10
Image 10
Sunbeam BT4400 manual Using your Bake & Grill, To bake or roast, To grill, To toast