Sunbeam LC7900 manual Fitting/Using the tools on your Food Processor, Placing the spindle

Fitting/Using the tools on your Food Processor

Note: All attachments must be firmly attached to the spindle. Always adjust the attachments until you are sure that they are correctly fitted.

Placing the spindle

1.Fit the spindle onto the drive shaft, see figure 4.

3.Place food into the processing bowl.

4.Fit the processing cover to the processing bowl, see figure 3 and place the food pusher in the feed chute.

5.Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’.

6.Start processing using the START/STOP or Pulse buttons.

7.When processing is complete, remove the spindle and blade from the processing bowl before removing the processed food.

Fig 4

Universal 's' Blade

1.Fit the processing bowl and spindle as detailed previously in figures 1, 2 & 4.

2.Fit the universal 's' blade over the spindle and press firmly into place, see figure 5.

Warning: Use caution, as blades are sharp. Always handle the processing blade by its central plastic section.

Fig 5

9