Sunbeam LC8900 manual Fitting/Using the tools on your Café Series Food Processor continued

Models: LC8900

1 36
Download 36 pages 56.26 Kb
Page 12
Image 12
Fitting/Using the tools on your Café Series® Food Processor continued

Fitting/Using the tools on your Café Series® Food Processor continued

Reversible grating/shaving, shredding and julienne discs

1.Fit the processing bowl and spindle as detailed previously, in figures 1, 2 and 4.

2.Select the 'Reversible' disc of your choice

– Shredding (fine or coarse), Grating/Shaving or the dedicated Julienne disc.

3.Fit the disc over the spindle and press firmly into place, see figure 6.

Warning: Use caution as the blades are sharp.

Variable slicing blade

1.Fit the processing bowl and spindle as detailed previously in figures 1, 2 and 4.

2.Fit the slicing disc over the spindle and press firmly into place, see figure 7.

Fig 7

Fig 6

4.Fit the processing cover to the processing bowl as previously shown in figure 3 and place the food pusher in the feed tube.

5.Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’.

6.Start processing using the On/Off button.

7.When processing is complete, remove the disc and spindle from the processing bowl before removing the processed food.

Warning: Use caution as the blades are sharp.

3.Fit the processing cover to the processing bowl as previously shown in figure 3 and place the food pusher in the feed tube.

4.Plug the power cord into 230-240V AC power outlet and turn the power 'ON'.

5.Start processing using the On/Off button.

6.When processing is complete, remove the disc and spindle from the processing bowl before removing the processed food.

12

Page 12
Image 12
Sunbeam LC8900 manual Fitting/Using the tools on your Café Series Food Processor continued, Variable slicing blade