Sunbeam SM8900 Using the milk frothing attachment, Using your StickMaster stick blender continued

Using your StickMaster stick blender continued

Using the milk frothing attachment

1.Insert the milk frothing attachment onto the base of the motor housing until you hear a click. See Figure 9.

4.To stop the stick blender, take your finger off the power button.

5.To detach the milk frother attachment, push the buttons at either side of the base of the motor housing until the two pieces separate. See figure 10.

Note: Please ensure to use a large enough jug when frothing as milk may splash. Milk volume can increase by up to 3-4 times of the original volume. A tall deep jug is recommended over a short shallow jug. Fat content and temperature of the milk will affect the way it froths.

Figure 9

2.Plug the power cord into a 230-240 volt power outlet and turn the power on.

3.Holding the stick blender, lower the milk frother into milk. Select speed 1 on the speed control dial, and then depress the power button (I).

Note: All stick blenders are designed to operate only whilst the power buttons remain depressed.

Frother attachment should not be lifted from the milk while in operation.

Figure 10

Note: Frother should not be used with hot liquids.

10