Care and Cleaning
After each use
1.Always remove the power cord from the power outlet before cleaning and remove the detachable stainless shaft of the stick blender.
Note: DO NOT immerse, that is, soak the detachable shaft of the stick blender in water because overtime the lubrication on the bearings can wash away.
2.Wash the detachable shaft under running water, without use of abrasive detergents.
3.When you have finished cleaning the detachable shaft of the stick blender, place it upright so that any water which may have got in, can drain out.
4.To clean attachments including the lid, the processing bowl, chopping blade, slicing/ shredding disc, whisk and milk frothing attachment wipe with warm soapy water.
5.Dry thoroughly.
Important: Blades are extremely sharp, handle with care.
Note: Should the stainless steel chopping blade dull from extensive use, sharpening is recommended at your local sharpening shop to ensure consistent results.
For a quick wash up
Between processing tasks, hold the stick blender in the beaker half filled with water and depress the power button for a few seconds.
Motor Housing
Clean the motor housing with a damp cloth.
Important: Ensure that the motor housing is not immersed in water or any other liquid.
13
