Sunbeam SM8900 manual Using the whisk attachment, Using your StickMaster stick blender continued

Using your StickMaster stick blender continued

Using the whisk attachment

1.Insert the whisk attachment onto the base of the motor housing until you hear a click. See Figure 7

4.For an extra boost of power during operation, the turbo speed button (II) may be depressed.

Note: The power button (I) should be released when selecting the turbo speed button (II).

5.To stop the stick blender, take your finger off the power button or the turbo speed button.

6.To detach the whisk attachment, push the buttons at either side of the base of the motor housing until the two pieces separate. See Figure 8.

Figure 7

2.Plug the power cord into a 230-240 volt power outlet and turn the power on. Holding the stick blender, lower the whisk into food.

3.Select the optimal speed for whisking by	Figure 8
gradually increasing the speed control
dial from 1 to 5, or as desired, and then
depressing the power button (I). Speed one
on the speed control dial is the slowest and
speed five is the fastest.

Note: All stick blenders are designed to operate only whilst the power buttons remain depressed.

9