Using your StickMaster stick blender continued
Using the processing bowl
Using the processing bowl with the chopping blade
1.Place the processing bowl on the
2.Fit the stainless steel chopping blade into the processing bowl.
3.Place food into the processing bowl.
4.Attach the lid onto the processing bowl and rotate the lid in a clockwise direction until it locks into position.
5.Insert the motor housing into the hole on
Note: All stick blenders are designed to operate only whilst the power buttons remain depressed.
8.For an extra boost of power during operation, the turbo speed button (II) may be depressed.
Note: The power button (I) should be released when selecting the turbo speed button (II).
9.To stop the stick blender, take your finger off the power button or turbo speed button.
10.To detach the processing bowl attachment, push the buttons at either side of the base of the motor housing until the two pieces separate.
See Figure 4.
Figure 3 | Figure 4 |
the top of the processing bowl attachment until you hear a click. See Figure 3.
6.Plug the power cord into a
7.Hold the bowl with one hand while operating the power button with the other. Select the optimal speed for the processing task by turning the speed control dial from 1 to 5 and then depressing the power button (I). Speed one on the speed control dial is the slowest and speed five is the fastest.
7
