Disassembly/Reassembly, and Adjustment (cont)
Step 11 - Wire Harnesses
Disassembly
a. Remove all the zip ties on the base frame.
b. Unwrap all the wire loom ties securing the harness to the frame.
c. For the main harness, remove the two screws that hold- ing the female beau plug (figure s11.1).
d. Remove the circuit breaker locking nut and push it through the bracket (figure s11.2), then remove the main wire harness.
e. For the light and A/C harness, remove the front shroud and then remove the mounting screws on the A/C plug bracket.(figure s11.3).
f. Push the light harness through the bracket. g. Pull the A/C harness through the bracket.
Reassembly
a. Reverse above instructions.
Adjustment
Note: The circuit breaker can be removed without removing the main harness.
a. Pull the quick disconnect terminal out from the bottom of the circuit breaker, then remove the circuit breaker locking nut.
s11.1
s11.2
s11.3
SUNRISE MEDICAL | ASPIRE SERVICE MANUAL | 2003 | PAGE 19 |
