Sunrise Medical 931157 service manual Disassembly/Reassembly, and Adjustment cont, figure s4.1

Disassembly/Reassembly, and Adjustment (cont)

Step 4 - Shroud

Disassembly

Note: Make sure the cog release pivot joints are in a posi- tion that matches the shroud cutout.

a.Use a #2 Phillips screw driver to remove the four mount- ing screws and slide out while lifting off the top shroud from the back of the chair.

(figure s4.1).

b.Use a #2 phillips screw driver to remove the six mount- ing screws on the inside of the shroud to remove the side shroud fairing (figure s4.2)

c.Lift the color side shrouds from the side shroud fairing. Note: Color side shrouds are attached using a hook and loop fastener system.

Reassembly

a. Perform the reverse of instructions above.

Note: Remember short screws to rear and middle holes and long screws to front.

s4.1

s4.2

SUNRISE MEDICAL ASPIRE SERVICE MANUAL 2003 PAGE 13