![](/images/new-backgrounds/1186977/18697753x1.webp)
Chapter 2: Installation
Possible System Memory Allocation & Availability
System Device
Size
PhysicalMemory
Remaining
(4 GB Total System Memory)
Firmware Hub flash memory (System BIOS)
1 MB
3.99
Local APIC
Area Reserved for the chipset
I/O APIC (4 Kbytes)
PCI Enumeration Area 1
PCI Express (256 MB)
PCI Enumeration Area 2 (if needed)
VGA Memory
TSEG
Memory available to OS and other ap- plications
4 KB
2MB
4KB
256MB
256 MB
512 MB
16MB
1MB
3.99
3.99
3.99
3.76
3.51
3.01
2.85
2.84
2.84
Figure 2-2. Installing and Removing DIMMs
SUPER | X7DB8/E |
DDR2 FBD |
To Install: Insert module vertically and press down until it snaps into place. Pay attention to the alignment notch at the bottom.
To Remove:
Use your thumbs to gently push the release tabs near both ends of the module. This should release it from the slot.
DDR2 FBD Slot II |