Supra SUPRA, THE LOGO manual Rad-A-Cage

Rad-A-Cage

If your Supra model has been equipped with an optional RAD-A-CAGE towing tower, please review this section for details on it’s usage, maintenance and storage. The cage is designed as a stable tower to enhance wakeboarding. It is NOT intended to be used to tow skiers, barefoot skiers, or multiple wakeboarders. Such use will void any warranties written or implied.

Before use, be sure that all mounting bolts are properly tightened in place.

Be aware of and avoid low overhead objects such as bridges, power lines, overhanging trees, etc.

To Raise Cage

-Lift the tower and swing up the rear legs. Install the four hand knobs.

The threads in the aluminum foot could be damaged if the bolts are not aligned and threaded correctly.

The Rad-A-Cage is designed to pull single (1) wakeboarder, trick skier, or kneeboarder.

NOTE: Apply a thin coat of anti-seize to the threads of the hand knobs periodically.

To Lower Cage for Storage

-Remove the four hand knobs from the top of the rear leg. While holding the tower up, lower the side legs. Then lower the tower downward into the boat.

— 46 © 2006 Skier’s Choice, Inc.