Supra THE LOGO manual Ignition Switch Blower Switch, Horn Switch, Supra dealer, Boat is in storage

Ignition Switch Blower Switch

	The blower switch activates the blower motor. The primary
	function of the blower fan is to remove any fumes from the
	bilge area. The blower also draws fresh air into the engine
	compartment.
	Never depend solely on the blower to eliminate dangerous
	fumes. Before starting the engine, always open the motor
	box to check if fumes are present. Switch on the blower fan a
	minimum of four minutes before starting the engine.
	NOTICE: If the blower fails to operate, reset the circuit
	breaker. If the blower still does not operate, notify your
	Supra dealer.
Located on the port side of the dashboard, the ignition switch
has three positions. In the vertical position the ignition is OFF.	Failure to operate the blower in accordance with the Coast
With the key in, turn the ignition switch one notch to the right	Guard Recommendation could result in an explosion.
to check all electrical equipment, including blower, pump, and
lights. Turn the ignition all the way to the right to operate the
starter.
NOTE: All electrical equipment should be turned off when
the boat is in storage.

Horn Switch

	Horn/Whistle Signals
	One Long Blast:
	Warning Signal (Coming out of slip)
	One Short Blast:
	Pass on my Port Side
	Two Short Blasts:
	Pass on my Starboard Side
	Three Short Blasts:
	Engines in Reverse
	Four or More Blasts:
	Danger Signal
	1. OVERTAKING / PASSING: Boat being passed has the
	right-of-way. KEEP CLEAR.
The Horn Switch is located on the port dash panel near	2. MEETING HEAD-ON: Keep to the right.
	3. CROSSING: Boat on the right has the right-of-way. slow
the ignition. Sound the horn by depressing the button.	down and permit him to pass.

© 2006 Skier’s Choice, Inc. 39 —