•One or more characters have been received followed by 100 ms of silence
•One or more characters followed by a carriage return character are received
•One or more characters followed by a line feed character are received
It is not necessary to enter the terminating carriage return or line feed character as part of the message name.
Switch Press Event Buttons (CentraLite)
When a button is pressed on a CentraLite keypad, the "When Switch" program is activated.
Pressing the 9 (SWITCH) key allows you to select the "When Command" for a switch pressed activated event.
You are first prompted to enter the switch number:
SWITCH NUMBER:
Enter the switch number followed by the ' # ' key.
Edit Program Command
Selecting 2 (CMD), from the Edit Program menu, allows the commanded action for the program to be specified. The following menu is displayed:
1=CONTROL 2=SECURITY
3=BUTTON 4=ALL ↓
5=TEMP 6=ENERGY
8=MESSAGE↑
After the command is specified, the display returns to the Edit Program menu:
Program Control Commands
Press the 1 (CONTROL) key to command lights and appliances. Specify the desired command - See Control.
Porch Light (Unit Name) 0=OFF 1=ON 2=DIM 3=BRT ↓
Porch Light (Unit Name) 4=LVL 5=RMP 9=TIM #=STA↑
If the selected unit is is configured to use the Compose Format, the second page of the menu is modified to allow Scene commands. Consequentially, the Level and Ramp Commands are removed from the menu.
Entry | Lights (Unit Name) | |
4=SCN | 9=TIM | #=STA↑ |
If the selected unit is not capable of dim and bright commands, only a single menu is shown.
Porch Light (Unit Name) 0=OFF 1=ON 9=TIM #=STA
If the selected unit is UPB, press 6 (LED) to control an LED on a UPB Keypad.
On the
buttons, respectively. On the
WHEN U1 SW 3:
55
