Home Automation SECURITY SYSTEM owner manual Set Up Dial, Telephone Access, Answer Outside Call

NEVER

Choose "NEVER" if you wish to temporarily deactivate a program without deleting it.

Other conditions include:

•IF LIGHT

•IF DARK

•IF ENERGY LO

•IF ENERGY MID

•IF ENERGY HI

•IF ENERGY CRIT

•IF PHONE DEAD

•IF PHONE RING

•IF PHONE OFFHK

•IF PHONE ONHOOK

•IF AC PWR OFF

•IF AC PWR ON

•IF BATTERY LOW

•IF BATTERY OK

Set Up Dial

The Set Up Dial menu is used to configure all of the telephone related items for the OmniLT. To enter the Set Up Dial menu, from the Setup menu, press the 4 (DIAL) key. Use the arrows to scroll through the items. For each item, the top line displays a description of the item and its current setting. The bottom line shows the available ranges for your selections.

Phone numbers can be up to 24 characters long. The number is shown on the bottom line of the display. Press the OFF key to enter a ' - ' into the number. Press the DAY key to specify a pause of 2 seconds (shown as a "T" on the display). Press the NIGHT key to enter a ' # ' into the number. Enter a single ' - ' for no number.

Telephone Access

The Telephone Access item allows you to turn the local (in-house) and remote telephone control feature on and off.

If set to On, the OmniLT will allow local and remote telephone access as described in Telephone Control. If set to Off, the OmniLT will not answer incoming calls ever, and will not work on the in house phones. Dial outs will still occur, and the system will operate normally when the OmniLT dials out.

If you do not have your OmniLT connected to a phone line, set Telephone Access to Off to keep the system from displaying "PHONE LINE DEAD". The default setting for Telephone Access is On.

Answer Outside Call

If you do not want your system to answer outside calls, set this item to No. The local (in-house) telephone control features will still work, but the system will never answer an incoming call.

The default setting for Answer Outside Call is Yes.

59