Set Up Time, Set Up Programs | Home Automation SECURITY SYSTEM

The times and days are changed by pressing the ' # ' KEY. Choose the 1 (TIME) key to change the On or Off times. You will be prompted to enter the new time. AM/PM must be specified for the time if the AM/PM format is being used, otherwise the entered time should be 13:00-23:59. Each item defaults to its current value. Press the up arrow key to select Sunrise and press the down arrow key to select Sunset.

CODE X(ON/OFF)TIME: 1=TIME 2=DAYS

TIME: 8:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

To change days, press the ' # ' key, then press the 2 (DAYS) key. You will be prompted to enter the day(s) that the code will be valid. Press 1-7 for Monday - Sunday, 0 for Never, 8 for Weekdays, and 9 for Weekends.

DAY(S): MTWTFSS

1-7=MON-SUN 0=NEVER

Duress Code

If you are forced to disarm the system against your will by an intruder, disarm it as you normally would, but use the Duress Code instead of your normal code. The system will disarm normally. No sirens will sound, no lights will flash, but the OmniLT will perform a silent dial out and say that this is a silent alarm.

To stop a silent dial out, turn your security system off by pressing OFF, then your code.

DURESS CODE:

0000-9999 0000=DISABLE↑

Set Up Time

To set up time and date, from the Setup menu, press the 2 (TIME) key. You will be prompted to enter the new time and date. AM/PM must be specified for the time if that format is being used, otherwise the entered time should be 13:00-23:59. Each item defaults to its current value.

TIME:

HHMM ↑=AM ↓=PM

DAYLIGHT SAVINGS TIME? (Are you currently observing DST) 0=NO 1=YES

ENTER DATE:

MMDDYY

DAY OF WEEK: 1-7=MON-SUN

Set Up Programs

Your OmniLT can be programmed to do automated control and security functions on a time schedule or in response to an event occurring in the system.

The OmniLT executes programs:

•Once at a certain time on a certain date (One-Time Program)

•On a certain date every year (Yearly Program)

•Repeatedly (Repeating Programs)

•In response to an event (Event Button Programs)

You can also conditionalize programs so that they only run under certain circumstances.

46

Image 50

Home Automation SECURITY SYSTEM owner manual Set Up Time, Set Up Programs, Duress Code

Contents

Document Number 21R00-1Rev. January Document Number 21R00-1Rev. January Copyright 2000-2006HAI All Rights Reserved CONTROL OVERALL DESCRIPTIONSECURITY SYSTEM OPERATION Contents SETUP TELEPHONE CONTROL INTRODUCTION Underwriters Laboratories UL Listing 1- OFF OVERALL DESCRIPTIONConsole Operation 2- DAY 6- UP ARROW Normal Top-LevelDisplayDisplay Menus 7- CONSOLE LED Trouble Beeps Error BeepsMain Menu To silence the beeper, press the * key Confirmation Beep OmniLT MaintenanceCancel Time Out 0 = OFF SECURITY SYSTEM OPERATIONArming the Security System 1 = DAY 3 = AWAY Using Shortcut Keys2 = NIGHT 4 = VACATION Bypassing Zones 9 = RESTOREQuick Arm Restoring Zones Burglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated Emergency Keys Fire Alarm ActivatedGas Alarm Activated OMNI Alarm Cancel Duress Code Entered or Duress Alarm ActivatedAlarm Reset Police Emergency Master Code Trouble IndicationsCodes Manager Code Panic SwitchesTesting Your System User Code CONTROL About UPB HAI Lighting Control HLC Format When set to UPB, the OmniLT controller canRoom Controller LED Indicators About Rooms About House Controllers When set to CentraLite, the OmniLT controller canAbout Lutron RadioRA About CentraLite About When set to RadioRA, the OmniLT controller canAbout ALC House Code Controlling Units Configuring Lighting Scenes in an HLC RoomScrolling Through Names Controlling a Room of HLC Lighting Controlling CentraLite Units StepOperation Controlling RadioRA Units Controlling ALC or X-10Units Scene Command Compose Timed CommandsRamp Command ALC Controlling Compose Units Controlling Outputs Status of a UnitInternal Flags All Off All On / OffAll Lights On Scene On Command Scene CommandsScene Set Command Leviton Scene Control UPB Links Scene Off CommandSetting a Link Lighting Scenes Activating and Deactivating Links Executing CentraLite Scenes ButtonsExecuting Phantom Buttons Leave for Work Button Dinner for Two Button Temperature ControlHAI RC-SeriesThermostats For HAI heat/cool thermostats Programmable Energy Saver Modules PESMs Control actions for temperature sensors Indoor and Outdoor Temperature Freeze AlarmsIMPORTANT NOTES Upstairs 2=LOW 3=HIGH #=STAT Status Temperature AlarmsHumidity Temperature Control of Appliances Configuring HLC Devices Configuring HLC Devices using an Omni Console Step Operation Setup Mode for HLC DevicesStep Operation Step Operation RING - RINGING ONHK - ON HOOKOFFHK - OFF HOOK DEAD - DEAD PHONE LINE Event Log Show Events Log Message MessagesShow Message Phone Message Clear MessageSay Message Send Message Pro-Link Pro-Linkalso has the capability to monitor the serial port for incoming text messages. When a text message is received, Pro-Linksearches through all 16 messages for a matching message. If one is found, the Program Command macro corresponding to the matching message is activated In-HousePhones TELEPHONE CONTROLTelephone Interface Remote Phones Main Menu Phone Access Denied - Remote LockoutAlternate Method Panic Button over the Phone # # # # # # PC AccessWhen a Two-WayAudio Module is being used Recording Your Address Voice Dialer Emergency Dial-OutDigital Dialer How the OmniLT Voice Dialer Works What You Hear - If Your OmniLT Calls You Entering the Code 1 = Master SETUPSet Up Codes 2 = Manager TIME Set Up TimeSet Up Programs Duress Code 1 = Add Programs 2 = Show Programs 3 = Delete All Programs Times Programs Edit ProgramsEdit Programs When Control Unit / Switch Press Event Buttons Button and Event Programs OmniLT Corresponding Switch TableSwitch UPB 6-ButtonKeypad Zone Event Buttons All On/Off Event Buttons X-10Event Buttons Alarm Event ButtonsUPB Link Triggers Miscellaneous Event Buttons Message Event Buttons Pro-Link Program Control Commands Edit Program CommandSwitch Press Event Buttons CentraLite Program Button Commands Unit Toggle CommandProgram Security Commands WHEN LINK 1 ON Porch Light STATUS Program Message Commands Program All On / All Off CommandsProgram Video Commands Edit Program Condition Program Time Clock Conditions Program Security Mode ConditionsProgram Zone Conditions Program Other Conditions Answer Outside Call Set Up DialTelephone Access Dial Type Remote CommandsRings Before Answer My Phone Number Dial Order Set Up ArmingDial Out Numbers Entry Delay All On For Alarm Enable Quick ArmEnable Auto Bypass Exit Delay Enable Freeze Alarm Set up MiscellaneousAnnounce Alarms Flash For Alarm DESCRIPTION FORMATNUMBER House Code All Off Latitude, Longitude, and Time Zone ZONE NAME NUMBER Set Up NamesDaylight Savings DESCRIPTION Set Up Voice Set Up Address UNDERWRITERS LABORATORIES REQUIREMENTS FIRE ESCAPE PLANNING FEDERAL COMMUNICATION COMMISSION NOTICE HAI 21487 Bayou Ct Abita Springs, LA CANADIAN INDUSTRY CANADA NOTICE UL RATINGS APPENDIX A - SPECIFICATIONSCONTROLLER OUTPUTS MAXIMUM CODE CHAR APPENDIX B - CHARACTER CODESCODE CHAR CODE CHAR DESCRIPTION APPENDIX C - VOICE DESCRIPTIONSCODE CODE CODE CODEDESCRIPTION DESCRIPTION CODE DESCRIPTION CODE DESCRIPTIONPage NOTE TO INSTALLER HAI New Orleans, LA U S A