For trouble restorations, the event log will show the zone name or specific trouble condition and "TRBL RST":

11:57 AM

5/8

BATTERY

TRBL RST

The system records each remote access. A remote phone access is when someone calls into the system from an outside phone line. Remote phone access is also recorded if the system phones out in response to an alarm and the called party enters a code. The event log displays the code used to access the system and "REM ACCESS":

12:05 PM

5/8

USER NAME

REM ACCESS

An event is logged after three unsuccessful attempts are made to log into the system from a remote phone, the OmniLT will lock out remote telephone access for 1 hour to discourage any further attempts to access the system - See Telephone Control.

Local access of the system using an in-house telephone is not recorded.

The event log will also record each time the PC Access software is used to access the system. The event log displays the code used to access the system and "PC ACCESS".

Messages

The Message menu is used to show, log, clear, and send text messages and say and phone voice messages.

To enter the Message menu, from the top-level display or from the main menu, press the 8 (MESSAGE) key on the console.

MESSAGE

1=SHOW 2=LOG 3=CLEAR

4=SAY 5=PHONE 6=SEND

Show Message

The 1 (SHOW) key allows you to display the selected text message(s) on the console's top-level display. This can be a helpful reminder of special events and occasions.

TRASH

NIGHT

ENTER

MESSAGE

You may enter the message number followed by the ' # ' key to display that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to display the selected message:

Mon Feb 21,

00 4:01 PM

TRASH NIGHT

 

When the message is displayed, the console will beep 4 times and the console LED will flash continuously. You may press the

'* ' key to acknowledge seeing the message. This will cause the LED to stop flashing, however, the message will remain on the display until it is manually cleared, or cleared by a program.

Log Message

The 2 (LOG) key allows you to store the selected text message(s) in the Event Log. This can be a helpful to keep track of the times and dates of events and occurrences.

You may enter the message number followed by the ' # ' key to log that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to log the selected message.

37

Page 41
Image 41
Home Automation SECURITY SYSTEM owner manual Messages, Show Message, Log Message