UNIT:

ENTER UNIT

Enter the unit number followed by the ' # ' key, or use the arrow keys to select the unit.

The unit is displayed and the display prompts for the state of the unit:

IF Porch Light: 0=OFF 1=ON

Program Security Mode Conditions

Press the 2 (SEC) key to specify that the program should only execute if the security system is armed in a particular mode. Select the security mode from the following menu:

0=OFF 1=DAY 2=NIT 3=AWY 4=VAC 5=DYI 6=NTD

Next, select whether the system is considered in the specified mode during the exit delay:

INCLUDE EXIT DELAY? 0=NO 1=YES

Program Zone Conditions

Select the 3 (ZONE) key to specify that the program should only execute if a specified security zone is either Secure or Not Ready. The display prompts you for the zone number:

ZONE:

ENTER ZONE

Enter the zone number followed by the ' # ' key, or use the arrow keys to select the zone.

The zone will be displayed and you will be prompted for the state of the zone:

IF Front

Door:

0=SECURE

1=NOT RDY

Program Time Clock Conditions

Select the 9 (TIME) key to specify that the program should only execute if a specified Time Clock is either On or Off. The display prompts you for the Time Clock number:

ENTER TIME CLOCK: 1-3

Enter the Time Clock number followed by the ' # ' key.

Next, specify the state of the time clock:

IF TIME CLOCK 1: 0=OFF 1=ON

Program Other Conditions

Select the # (OTHER) key to select a condition from a list of other conditions.

SELECT CONDITION:

NONE

Choose "NONE" when editing a program and choose not to conditionalize the program.

SELECT CONDITION:

58

Page 62
Image 62
Home Automation SECURITY SYSTEM Program Security Mode Conditions, Program Zone Conditions, Program Time Clock Conditions