Swim'n Play 420745-15 warranty END Support Post Assembly, Plates & Vertical Plates Assembly

T-PLATES & VERTICAL PLATES ASSEMBLY 5

Start assembling the supports by placing two T-Plates inside the Bottom Support and insert and tighten the 3/8” - 16 x 1” hex head bolts and 3/8” - 16 hex nuts as shown on image A.

AB

Attach the Vertical Plate onto the Bottom Support using two #12 x 1/2” sheet metal screws as shown on image B.

END SUPPORT POST ASSEMBLY

End Support Posts	D
(4 per pool)

Insert the End Support	C
Post between the
T-Plates and through
the hole in the Vertical
Plate (image C).	Inside
	of Pool

Then insert the Support

Post over the End

Support Post (image D).

The open side of the
posts must face the
inside of the pool.
Insert the 3/8” - 16 x 1”	Outside
hex head bolts and
	of Pool
3/8” - 16 nuts and
tighten as shown on
image E.

6

E

10