11
CENTER SUPPORT POST ASSEMBLY 7
Center Support
Post
G
F
Insert the Support Post
between the T-Plates and
through the hole in the
Vertical Plate (image F).
The open side of the post
must face the inside of the
pool.
Insert the 3/8” - 16 x 1” hex
head bolts and 3/8” - 16 nuts
and tighten as shown on
image G. Leave the top two
holes on each side open.
Make sure the Buttresses are
exactly vertical with a 90 degree
angle from the Bottom Support.
Inside
of Pool
Outside
of Pool
Leave
these
holes open