No. 12 x 1/2”
Sheet Metal
Screw
Insert two rails into a plate, in the same manner and using the same spacing as you have done
on the bottom rail and plate assembly. Push the rails and plate assembly onto the plastic edging leaving the far end in the air.
MAKE SURE THAT THE TOP PLATE IS CENTERED DIRECTLY ON TOP OF THE BOTTOM PLATE.
Attach the vertical to the top and bottom plate using the No.12x1/2" Sheet Metal Screws.
Insert the exposed end of a top rail into another top plate with a top rail inserted into the opposite side. Push the top plate with rails onto the edging again leaving the far end of the rail in the air. Continue in this manner all the way around the pool.
| RAIL | |
PLASTIC | TOP PLATE | |
EDGING | ||
|
22
