- 26 - EN
1C29
PLAYBACK

NORMAL PLAYBACK

Make sure ...
TV/VCR/DVD power must be turned on.
1Insert a prerecorded tape
If the erase-protection tab has been removed, the
TV/VCR/DVD will start playback automatically.
2To begin playback
Press the PLAYbutton.
3To stop playback
Press the STOPbutton when play-
back is completed.
NOTES:
If you press the PLAYbutton (of the TV/VCR side)
in the DVD mode, you can start the VCR playback.
If you press the SELECT button during the VCR
playback, it will stop and the mode will change to
the DVD mode. In addition, the same function
operates with the DVD side PLAYbutton or the
OPEN/CLOSE button.
TV/VCR

TRACKING ADJUSTMENT

Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
However when playing pre-recorded tapes or tapes
recorded on other VCR, noise lines (black and
white streaks) may appear on the playback picture.
If this occurs, you can adjust the tracking control
manually by pressing the CHANNELbutton Kor
Luntil the streaks disappear. To return to the DTR
function, stop the tape once and start playback
again.
You can reduce the noise lines by pressing the
CHANNELbutton Kor Lin slow mode too.
Tracking adjustment in Slow mode will not be set
automatically.
TV/VCR

STILL PICTURE

You can view a still picture on the TVscreen during
playback (the Still mode). Press the PAUSE button
during playback. Only tapes recorded in the SLP
mode will show the least amount of lines. Press the
PLAYbutton to return to playback.
NOTES:
You can advance the picture one frame at a time by
pressing the PAUSE button during the Still mode.
If it is left in the Pause mode for more than five
minutes, the TV/VCR/DVD will automatically
switch to the Stop mode.
TV/VCR

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins
to vibrate vertically, stabilize the picture by pressing
the CHANNELbutton Kor L.
NOTE:
If there are video noise lines on the screen, see Tracking
Adjustment section.
TV/VCR

SLOW MOTION

Press the PAUSE button, then press the F.FWD g
button to start the playback in slow motion. The
TV/VCR/DVD mutes the sound during slow motion.
Press the PLAYbutton to return to normal playback.
NOTE: If it is left in the Slow mode for more than
five minutes, the TV/VCR/DVD will automatically
go into the Stop mode.
TV/VCR
PLAY B
STOP