Husqvarna 1200 Checking and adjusting the brake, Check the level of the battery acid, Maintenance

Models: 1030 BioClip 1200

1 40
Download 40 pages 23.75 Kb
Page 24
Image 24
Checking and adjusting the brake

MAINTENANCE

Checking and adjusting the brake

Check that the brake is correctly adjusted by placing the machine on a slight downward slope and applying the brake.

If the machine does not stand still the brake should be adjusted.

The brake is adjusted as follows:

1.Release the lock nuts (A).

2.Tension the wire with the adjusting screw (B) until the play in the wire is taken up.

3.Tighten the lock nuts (A).

4.On completion of the adjustment the brake should be checked again.

!WARNING!

Poorly adjusted brakes can result in reduced braking power.

Check the level of the battery acid

Check that the level of the battery acid lies be- tween the markings. Top up the cells with distilled water only.

!WARNING!

Procedures on contact with acid

External: Rinse well with plenty of water.

Internal: Drink large quantities of water or milk. Contact a doctor as soon as possible.

Eyes: Rinse well with plenty of water. Contact a doctor as soon as pos- sible.

Batteries emit explosive gas. Sparks, flames and cigarettes must absolutely not be brought into the vicinity of the battery.

B

A

 

A

Check the safety system

The machine is equipped with a safety system which prevents starting or driving the machine unless someone is sitting in the seat. Check daily that the safety system functions.

22 – English

Page 24
Image 24
Husqvarna 1200 Checking and adjusting the brake, Check the level of the battery acid, Check the safety system, Maintenance