Husqvarna 1200, 1030 BioClip manual Driving the machine

Models: 1030 BioClip 1200

1 40
Download 40 pages 23.75 Kb
Page 16
Image 16
Driving the machine

DRIVING

5.When the engine starts release the ignition key immediately back to neutral position.

IMPORTANT INFORMATION

Do not run the starter for more than about 5 seconds at a time. If the engine does not start, wait about 10 seconds before trying again.

6.Push the choke lever gradually forward when the engine has started.

7. Set the required engine speed with the throttle control.

!WARNING!

Never run the engine indoors, in en- closed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide.

Driving the machine

1. Release the parking brake by pressing the brake pedal.

2.Carefully press down one of the pedals until the required speed is obtained.

To drive forward press down pedal (1), or to reverse pedal (2).

1

2

14 – English

Page 16
Image 16
Husqvarna 1200, 1030 BioClip manual Driving the machine