PRESENTATION
Lever for adjustment of the cutting height
The cutting height can be adjusted to 7 different positions with the cutting height lever.
To achieve an even cutting height it is important that the tyre pressures are the same on the front wheels (60 kPa).
Parking brake
The parking brake is applied as follows:
1. Push down the brake pedal.
2. Push in the lock button on the steering column.
3. Release the brake pedal while holding the button pressed.
The parking brake lock disengages automatically when the brake pedal is pressed.
Seat
The seat has a jointed attachment on the front edge and can be tipped forward.
The seat can also be adjusted lengthways.
To adjust move the lever under the front edge of the seat to the left, so that the seat can be moved forward or backwards to the required position.
Fuelling
The engine should be run on at least 92 octane leaded or unleaded petrol (not oil mixed). For USA and Canada at least 87 octane leaded or unleaded petrol (not oil mixed).
!WARNING!
Petrol is highly inflammable. Observe care and fuel outdoors (see safety instructions).
12 – English
