DRIVING
!WARNING!
Never drive the machine on ground at an angle of more than 15°. Mow slopes upwards and downwards, never across. Avoid sudden changes in direction.
Stopping the engine
Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard.
1.Lift up the cutting unit by pulling the lever back to the locked position.
MAX 15 |
2.Move the throttle control to the MIN. position. Turn the ignition key to the STOP.
Disengage lever
To move the machine when the engine is switched off the disengage lever must be pulled backwards.
