«*2h6+¬ | Husqvarna 1200, 1030 BioClip specs

«*2}h¦6+¬

Image 38

Husqvarna 1200, 1030 BioClip manual «*2h6+¬

Contents

Rider 1030 BioClip Rider 101 89 Svenska Contents General operation Safety InstructionsSafe operation practices for ride-on mowers II. Slope operation IV. Service Explanation of Symbols Read the instructions These instructions are for your safety. Read them carefully General use Driving on slopes Do as follows Do not do the following MaintenanceChildren Never drive the machine in an enclosed space Location of the controls PresentationPresentation Speed limiter Throttle controlChoke lever Cutting unit Lift lever for cutting unit Seat Lever for adjustment of the cutting heightParking brake Fuelling Starting the engine DrivingBefore starting Driving the machine Cutting tips Disengage lever Stopping the engineMAX Daily Maintenance interval MaintenanceMaintenance schedule Hours Front hood Dismantling of the machine hoodsEngine hood Right-hand fender Checking of the fuel pump’s air filter Check the engine’s oil levelCheck the engine’s cooling air intake Check the transmission’s air intake Check the transmission’s oil level Checking and adjustment of the steering wires Check the safety system Checking and adjusting the brakeCheck the level of the battery acid Poorly adjusted brakes can result in reduced braking power Do not use compressed air to clean the paper filter Replacing the air filter Maintenance Checking and adjusting the cutting unit’s parallelism Dismantling the cutting unit Checking the blades Changing the oil General lubrication Replacement of the oil filterLubrication Checking and adjustment of the throttle wire Replacement of the fuel filter Checking the tyre pressure Trouble Shooting Schedule Problem Procedure Winter storage ServiceStorage Wiring Diagram Technical Data Rider 1030 Bioclip, Rider English «*2h6+¬ English «*2h6+¬