TROUBLE SHOOTING SCHEDULE

Problem

Procedure

 

 

 

 

 

Engine will not start.

Fuel tank empty.

 

 

Plugs defective.

 

 

Plug connections defective.

 

 

• Dirt in carburettor or fuel pipe.

 

 

 

 

 

Starter does not pull round engine.

Battery flat.

 

 

• Bad contact between cables and battery terminals.

 

 

• Lift lever for cutting unit in wrong position.

 

 

• Main fuse blown. The fuse is located in front of the

 

 

 

battery under the battery cover.

 

 

Ignition lock faulty.

 

 

• Gear shift/hydrostat pedal not in neutral.

 

Engine does not run smoothly.

Plugs defective.

Carburettor incorrectly set.

Air filter clogged.

Fuel tank vent blocked.

Ignition setting defective.

Dirt in fuel pipe.

Engine seems to have no power.

Air filter clogged.

 

Plug defective.

 

• Dirt in carburettor or fuel pipe.

 

Carburettor incorrectly set.

 

 

 

Engine overheats.

Engine overloaded.

 

• Air intake or cooling flanges blocked.

 

Fan damaged.

 

• Too little or no oil in engine.

 

Ignition defective.

 

Plugs defective.

 

 

 

Battery does not charge.

One or more cells in the battery faulty.

 

• Bad contact between battery terminals and cables.

 

 

 

Machine vibrates.

Blades are loose.

 

Engine is loose.

 

• Imbalance on one or more blades, resulting from

 

 

damage or inferior balancing after sharpening.

 

 

 

Uneven mowing.

Blades blunt.

 

• Cutting unit set skew.

 

• Long or wet grass.

 

• Grass blockage under hood.

 

• Different tyre pressures on right and left sides.

 

Over-speeding

 

Drive belts slipping.

English – 31

Page 33
Image 33
Husqvarna 1030 BioClip, 1200 manual Trouble Shooting Schedule, Problem Procedure