Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna 1030 BioClip, 1200 manual Presentation, Location of the controls

Models: 1030 BioClip 1200

1 40

Download 40 pages 23.75 Kb

Page 11

PRESENTATION

PRESENTATION

Presentation

These instructions describe two machine models, Rider 1030 Bioclip and Rider 1200.

Rider 1030 Bioclip and Rider 1200 are fitted with Vanguard V-Twin engines from Briggs & Stratton of 18 h.p.

The cutting unit on Rider 1200 has rear ejection with a moving width of 1200 mm.

The power transmission from the engine is handled by a hydrostatic gearbox which enables stepless variation of the speed with the foot pedals.

There is one pedal for driving forward and one for reversing.

Rider 1030 has a cutting unit with Bioclip function and a mowing width of 1030 mm.

8	7		6	5	4	3	2	1	13
	9	10	11					12	13	14

Location of the controls

1.	Ignition lock	8.	Speed limiter for driving forward
2.	Choke lever	9.	Brake pedal
3.	Throttle control	10.	Lock button for parking brake
4.	Counter	11.	Lever for adjustment of seat
5.	Lever for adjustment of cutting height	12.	Fuel tank cap
6.	Lifting lever for cutting unit with lock button	13.	Main lock
7.	Speed limiter for reversing	14.	Lever to disengage the drive

English – 9

Image 11

Husqvarna 1030 BioClip, 1200 manual Presentation, Location of the controls

Contents

Operator´s manual 101 89Rider 1030 BioClip Rider Svenska – Rider 1030 BioClip and Rider CONTENTS Operator’s Manual forII.Slope operation SAFETY INSTRUCTIONSSafe operation practices for ride-onmowers I.General operationSAFETY INSTRUCTIONS IV. ServiceEXPLANATION OF SYMBOLS Never carry passengers General useRead the instructions before starting the machine Clear the area from stones etc. before cuttingSAFETY INSTRUCTIONS Be extra careful when driving on slopesDriving on slopes Cut slopes upwards and downwards, not sidewaysNever allow children to drive the machine MaintenanceChildren Keep children away from the mowing area• Be careful with the maintenance of the battery Never drive the machine in an enclosed spaceSAFETY INSTRUCTIONS Location of the controls PRESENTATIONPresentation PRESENTATION Throttle controlChoke lever Speed limiterLowering of the cutting unit Cutting unitLift lever for cutting unit Lifting of the cutting unitFuelling Lever for adjustment of the cutting heightParking brake SeatStarting the engine DRIVINGBefore starting DRIVING Driving the machineneath each time it is used Cutting tipsDRIVING 16 – English Stopping the engineDisengage lever DRIVINGMaintenance schedule MAINTENANCEFront hood Dismantling of the machine hoodsMAINTENANCE Engine hoodFULL Check the engine’s oil levelCheck the engine’s cooling air intake Checking of the fuel pump’s air filterMAINTENANCE Check the transmission’s air intakeCheck the transmission’s oil level MAINTENANCE Checking and adjustment of the steering wiresMAINTENANCE Checking and adjusting the brakeCheck the level of the battery acid Check the safety systemIMPORTANT INFORMATION Replacing the air filterMAINTENANCE 24 – English MAINTENANCEMAINTENANCE Cutting unit on Rider 1030 Bioclip unit Dismantling the cutting unitChecking the blades Cutting unit on Rider 1200 rear ejectionMAINTENANCE Changing the oilMAINTENANCE Replacement of the oil filterLubrication General lubricationMAINTENANCE Checking and adjustment of the throttle wireIMPORTANT INFORMATION Replacement of the fuel filterChecking the tyre pressure MAINTENANCEProcedure TROUBLE SHOOTING SCHEDULEProblem Winter storage ServiceSTORAGE 4.Ignition lock 5.Counter 6.Start relay 7.Engine WIRING DIAGRAM1.Brake switch, hydrostat 2.Microswitch, cutting unit 3.Microswitch, seatRider 1030 Bioclip, Rider TECHNICAL DATAEnglish – «*2h6+¬ English – «*2h6+¬