CLOCK SETTING
Set the clock before you try timer recording. If a Public Broadcasting Station (PBS) is available in your area, follow Auto Clock Setting below. If not, follow Manual Clock Setting on page 19.
Important
You must know the local PBS station in your area.
Auto Clock Setting
NOTE:
•Make sure that the antenna or cable are connected to the unit.
•If the TV/VCR/DVD is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR/DVD must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.
POWER 
Number
SETUP 
/ 
/ 
/ 
ENTER 
1Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
2Select "SETUP" using s/B buttons, then press ENTER button.
SETUP menu will appear.
3Select "Clock" using K/L/s/B buttons, then press ENTER button.
Clock menu will appear.
4Select "Auto Clock Setting" using K/L buttons, then press ENTER button.
Option window will appear.
Setup > Clock | VCR | DVD |
Clock Setting |
|
|
Auto Clock Setting | OFFff |
|
Daylight Saving Time | Manual | |
Off |
| |
5Select "Manual" using K/L buttons, then press ENTER button.
Enter your PBS channel number using Number buttons or K/L buttons, then press ENTER but- ton.
Setup > Clock | VCR DVD |
Clock Setting
Auto Clock Setting | Set Channel No. |
AutoOFF | |
Daylight Saving Time | CH1Manual |
Off |
6Press SETUP button to exit.
7Press POWER button to turn off the unit.
This unit will search for the time when the power is off. Leave it off for several minutes to give this unit time to set the clock.
NOTE:
•The clock may set itself automatically after you connect the antenna/cable signal to this unit and plug in the power cord. After setting, turn the power on to check the current time appeared on the TV screen is correct.
•If the current time is not displayed or the displayed clock is not correct, set the clock manually.
18
