Connections
Connection to a TV (cont’d)Note
Set your TV to channel 3 or 4 if you use coaxial connection.
After you have completed connections
•Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check your TV owner’s manual for details.
Input Mode Names for Common TV Brands (Example)
Admiral | AUX | Panasonic | TV/VIDEO |
|
|
|
|
Curtis Mathis | LINE1, LINE2, 00, 90, 91, 92, 93 | RCA | INPUT, TV/VCR, 00, 90, 91, 92, 93 |
|
|
|
|
GE | INPUT, TV/VCR, 00, 90, 91, 92, 93 | Samsung | TV/VIDEO |
|
|
|
|
Hitachi | INPUT, AUX | Sanyo | VIDEO |
|
|
|
|
JVC | VIDEO, VIDEO 1, VIDEO 2, VIDEO 3 | Sharp | 00 |
|
|
|
|
Kenwood | AUX | Sony | VIDEO1, VIDEO2, VIDEO3 |
|
|
|
|
00 | Toshiba | TV/GAME | |
|
|
|
|
Magnavox | AUX CHANNEL | Zenith | 00 |
|
|
|
|
To set progressive scan mode, refer to pages
•This unit compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
Connection to a cable box or satellite box(Cable box or |
| (Back of this unit) |
| |
DVD/VCR |
|
| ||
Satellite box) |
|
| ||
IN |
|
| ||
|
| ANTENNA |
|
|
Cable TV signal |
|
|
|
|
IN | OUT |
| RF cable | E |
|
|
| ||
|
|
|
| |
|
| OUT | (supplied) |
|
(Back of TV)
This connection allows you to view or record a scrambled channel. With this connection, channels cannot be changed on this unit. You can view or record ONLY the channels you have selected on the cable box or the
satellite box.
•While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1)Turn on this unit by pressing [POWER]. The “POWER” indicator on the front panel will appear. Then, press [CHANNEL L / K] to select channel 3 or 4 (the same channel as the output channel of the cable box or satellite box).
•If noise appears on the TV screen, press [VIDEO/TV] on the remote control.
•If you use the channel 4, you will need to change this unit’s RF output to channel 4. Refer to “RF output switch” on page 81.
2)At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3)At the cable box or satellite box, select the channel you want to view or record.
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article
EN 15
the Changing Español Others functions VCR menu Setup Editing discs Playing Recording started Getting Connections start you Before