Sylvania DVR91VG Audio setting cont’d, Video setting, Settings for Dolby Digital Default Stream

Changing the Setup menu

Audio setting (cont’d)

B Settings for Dolby Digital (Default : Stream)

Digital Out - Dolby Digital
	DVD
PCM
Stream

•Using [K / L], select a setting. Press [ENTER]. Your setting will be activated.

PCM :Convert the Dolby Digital into PCM(2 channel).

When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”.

Stream :Outputs Dolby Digital signals.

When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”.

Note

When playing a DVD-RW disc recorded in VR mode

•If the audio source on a disc is Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main (L), sub audio (R), or a mix of both (L/R) with your amplifier/decoder.

Dynamic Range Control (Default : ON)

Set to ON to compress the range between soft and loud sounds.

	Audio		DVD
Digital Out
Dynamic Range Control		ON

4

Press [SETUP] to exit.

Audio - Dynamic Range Control
	DVD
ON
OFF

Video setting

•Using [K / L], select a setting.

Press [ENTER].

Your setting will be activated.

PQRS	TUV	WXYZ	VIDEO/TV
7	8	9		4
DISPLAY	SPACE	CLEAR	SETUP
	0
TOP MENU	MENU/LIST	RETURN	ENTER

Progressive (Default : OFF)

This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.

1

Press [SETUP].

2

Using [K / L], select “Playback”. Press [OK]. Playback menu will appear.

3

Using [K / L], select “Video”. Press [OK].

4

Using [K / L], select “Progressive”. Press [OK].

5

Using [K / L], select “ON”. Press [OK].

Confirmation window will appear.

6

Using [s / B], select “Yes”. Press [OK].

7

Using [K / L], select “Yes” within 15 seconds. Press [OK].

72EN

PQRS	TUV	WXYZ	VIDEO/TV
7	8	9		1
DISPLAY	SPACE	CLEAR	SETUP
	0
TOP MENU	MENU/LIST	RETURN	ENTER

2

3

4

5

6

7

Note

•If your TV is compatible with Progressive Scan (525p / 480p), you must use the Component video cable (commercially available) to connect this unit to the TV. (See Method 3 on page 14.) If not, use the video cable and set the Progressive Scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

•When selecting “No” or not pressing any keys on the unit or remote control within 15 seconds at step 5, Progressive Scan remains to be “OFF” (interlace scan).