Sylvania LD370SS8 5Switching Each Mode, 5Switching Audio Mode, To Cancel the Sleep Timer

WATCHING TV

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until “Sleep Off” is displayed on the TV screen.

Note:

•The sleep timer setting display will automatically disappear in a few seconds.

•When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

5Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit.

Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes.

TV/DTV channel

Video1

Video2

Component1

or

Component2

HDMI1

HDMI2

PC

5Switching Audio Mode

This section describes how to switch the audio language.

TV

1Press [AUDIO] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

6

SAP / STEREO

When all audio are available

SAP / STEREO SAP / MONO

SAP / STEREO

When stereo and monaural audio are available

MONO / STEREOMONO / STEREO

When SAP and monaural audio are available

SAP / MONO SAP / MONO

When only monaural audio is available

MONO (Cannot be switched)

STEREO : Outputs stereo-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio

•The information display will automatically disappear in a few seconds.

DTV

•Pressing [CH L] reverses the direction of the mode.

•To use the video or S-video input jack of VIDEO 1 on the unit, select “Video1”.

•To use the video or S-video input jack of VIDEO 2 on the unit, select “Video2”.

•To use the component video input jack of COMPONENT 1 on the unit, select “Component1”.

•To use the component video input jack of COMPONENT 2 on the unit, select “Component2”.

•To use the HDMI 1-IN jack on the unit, select “HDMI1”.

•To use the HDMI 2-IN jack on the unit, select “HDMI2”.

•To use the PC-IN jack on the unit, select “PC”.

1Press [AUDIO] to display the currently selected language and the number of available languages.

6-1

English 1/3

2Press [AUDIO] repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast. “Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

•The information display will automatically disappear in a few seconds.

Note:

• Pressing [AUDIO] does not control external audio device.

16

EN