To verify information about an Ethernet port:
WS5000.(Cfg)>show ethernet 2<enter>
The system displays information about Ethernet port 2 (as opposed to port 1):
WS5000.(Cfg)> show ethernet 2 |
| |
Name |
| : Ethernet 2 |
Network Interface Card # | : 2 | |
Description |
| : Ethernet Adapter |
MAC Address |
| : 00:A0:xx:xx:xx:xx |
Status |
| : Enable |
Online |
| : Yes |
Speed |
| : 100 |
DHCP status |
| : Disable |
IP Address |
| : 192.168.91.153 |
Network Mask | : 255.255.255.0 | |
Port type | : | |
VLAN Tags seen | : None | |
| : 00d:00h:16m | |
Transmit packets | : 852 | |
Received packets | : 12783 | |
Gateway details | : | |
1. | 192.168.91.2. |
|
DNS details |
| : |
1. | 192.168.95.1. |
|
2. | 192.168.95.229. |
|
WS5000.(Cfg)>
After the Ethernet port has been configured and verified, type exit to return to the Console command prompt.
The switch installation is complete. The serial cable can be disconnected from the administrative PC. The next section describes a basic switch security policy configuration using the browser interface of a PC connected to the same subnet as Ethernet port 2 on the WS 5000.
5
