1 - 12 MC70 User Guide

Changing the Power Settings

To set the EDA to turn off after a short period of non-use:
1. Tap Start - Settings - System tab - Power icon - Advanced tab.
2. Select the On battery power: Turn off device if not used for check box and select a value from the
drop-down list.
3. Select ok.

Changing the Backlight Settings

To change the backlight settings in order to conserve more battery power:
1. Tap Start - Settings - System tab - Backlight icon - Battery Power tab.
2. Select the Disable backlight if device is not used for check box and select a value from the drop-down
list.
3. Select the Brightness tab.
4. Tap the Disable backlight check box to turn off the display backlight, or use the slider to set a low value
for the backlight.
5. Select ok.

Changing the Keypad Backlight Settings

To change the key pad backligh t s ett ing s in or de r to cons er ve more ba tt er y po w er :
1. Tap Start - Settings - System tab - Keylight icon - Battery Power tab.
2. Select the On battery power: Disable keylight if device if not used for check box and select a value
from the drop-dow n list.
3. Select the Advanced tab.
4. Tap the Disable keylight check box to turn off the keypad backlight.
5. Select ok.

Turning Off the Radios

Turning Off the WLAN Radio

To turn off the WLAN radio , tap the Signal S trength icon and select Disable Radio. A red X appears across the
icon indicating the radio is disabled (off).
To turn the WLAN radio ba ck on, t ap the Sig nal S trength icon and sele ct Enable Radio. The red X disapp ears
from the icon indicating the radi o is enabled (on).