
2 - 8 MC70 User Guide
LED Indicators
The MC70 has three LED indicators. The Scan/Decode LED indicates status for scanning. The Ch ar ge Status
LED indicates status for main battery charging. The Radio Power Status LED indicates radio status. Table 2-3
describes the LED indications.
Figure 2-10
LED Indicators
Table 2-3
LED Indications
LED State Indication
Scan/Decod e LED
Solid Green Successful decode/capture.
Solid Red Laser enabled, scanning/imaging in process.
Off Not enabled.
Charge Status LED
Slow Blinking Amber Main battery in EDA is charging.
Solid Amber Main batter y in EDA is fully charged.
Fast Blinking Amber Charging error.
Off Not charging.
Radio Power Status LED*
Slow Blinking Green Any one of the radios is on.
Off No ra dio is on.
*The Radio Power Status LED is disabled by default. A registry setting change
is required to make this LED functional. Refer to the MC70 Integrator Guide.
Radio Power
Status LED
Scan/Decode
LED Charge
Status LED
NOTE For information about scanning/decoding, see Data Capture on page 2-20. For information
about radio status and settings, see Chapter 3, Using Bluetooth, Chapter 4, Using the
MC7004/MC7094 Phone, or refer to the MC70 Integrator Guide.