4) Set the start time

 

ONE TIME PROGRAM

 

PROGRAM NUMBER

4

 

 

DATE

05 /13 MON

First, press the PLAY button or the STOP

START TIME

- - : - -

- -

END TIME

- - : - -

- -

button for the hour. Then, press the

CHANNEL

- -

 

REC SPEED

- -

 

F.FWD button. Next, press the PLAY

button or the STOP button for the minute. Then, press the F.FWD button. And then, press the PLAY button or the STOP button for AM or PM. Then, press the F.FWD button.

¡If a tape is not in the DVD/VCR or does not have a safety tab, the TIMER SET light flashes and timer recording will not operate. Please insert a recordable tape.

¡When all timer recordings are finished, the TIMER SET light will flash. To use the DVD/VCR again as usual, press the TIMER SET button to disable the flashing TIMER SET light, then press the VCR/TV button to select the VCR position. The VCR/TV light will appear. Press the VCR button to choose VCR or DVD mode, then continue with the other features as

5) Set the end time

Follow the same instructions as "Set the start time" to set

the end time.

6) Set the channel number

Press the PLAY button or the STOP button repeatedly for the desired channel number. Then, press the F.FWD button.

ONE TIME PROGRAM

PROGRAM NUMBER

4

DATE

 

05 /13 MON

START TIME

07: 30

PM

END

TIME

- - : - -

- -

CHANNEL

- -

 

REC SPEED

- -

 

ONE TIME PROGRAM

PROGRAM NUMBER

4

DATE

 

05 /13 MON

START TIME

07: 30

PM

END

TIME

08: 30

PM

CHANNEL

- -

 

REC SPEED

- -

 

described in this manual.

¡When timer recordings are set, the TIMER SET light will come on. To use the DVD/VCR as usual until the time for the recording, press the TIMER SET button so that the TIMER SET light disappears. Press the VCR/TV button to choose the VCR position. The VCR/TV light will come on. Press the VCR button to choose VCR or DVD modes, then continue with the other features as described in this manual.

If you want to use the DVD player during

If you connected the DVD/VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, set the DVD/VCR to channel 3 or 4 i.e. the same channel as the CH3 or CH4 switch on the back of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box. Leave the cable box or satellite box on for timer recording.

7) Set the tape speed

 

ONE TIME PROGRAM

 

 

PROGRAM NUMBER

4

Press the PLAY button or the STOP

DATE

05 /13 MON

START TIME

07: 30

PM

button repeatedly for the desired tape

END TIME

08: 30

PM

CHANNEL

16

 

REC SPEED

SP

 

speed. Then, press the F.FWD button.

 

SP

 

 

SLP

 

5To set another program, repeat step [4]. To exit from the set up screen, press the CLEAR/C.RESET button (You only exit from the set up screen. the information you entered for the timer recording will not be cleared).

6When you finish programming, press the TIMER SET button to activate the timer.

¡As the TIMER SET light comes on the VCR becomes STANDBY status, and switches to DVD OUTPUT mode automatically.

¡When DVD sits idle for more than thirty-five min- utes, the DVD power will be turned off automatical- ly. If you press the TIMER SET button under such condition, the DVD/VCR power will be turned off and become STANDBY status.

TO CLEAR A PROGRAM

Follow the steps from 2 to 3. Select the program num- ber you want to clear, and then press the REW button.

HINTS FOR TIMER

RECORDING

a VCR timer recording or while the TIMER SET light is on or flashes.

¡You can use the DVD player while the TIMER SET light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD/VCR. Press the VCR/TV button to choose VCR position. Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to use the DVD.

TO STOP AN AUTOMATIC TIMER PRO- GRAM ALREADY STARTED

Press the STOP/EJECT or the TIMER SET button on the DVD /VCR.

TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM

1Turn the power on by pressing the POWER button. (If the DVD/VCR is in TIMER STAND- BY status, press the TIMER SET button instead of the POWER button.)

2Select main menu by pressing the MENU button.

3Select "TIMER PROGRAMMING" by press- ing the PLAY or the STOP button. Then, press the F.FWD button.

4Select the program number which you want to check by pressing the PLAY or the STOP button.

¡The details of the selected program appears on the TV screen.

 

VCR

¡Go to the digit you want to change by pressing the

 

 

 

 

 

F.FWD or the REW button. Then, enter correct num-

¡If there is a power failure or the DVD/VCR is

 

 

bers by pressing the PLAY or the STOP button.

unplugged for more than 30 seconds, the clock set-

 

¡You may cancel the entire program by pressing the

ting and all timer settings will be lost.

 

REW button while the program number flashes.

¡If a tape ends during TIMER RECORDING, the

 

 

 

VCR will stop, eject the tape, and switch to the DVD

 

5 Press the CLEAR/C.RESET button to exit.

mode automatically as the TIMER SET light blinks.

 

 

 

6 Press the TIMER SET button to return to

(If the DVD power is off, the DVD/VCR will

 

become STANDBY status).

 

timer stand-by mode.

 

– 21 –

EN

1L25

Page 21
Image 21
Symphonic WF802 Hints for Timer Recording, To Clear a Program, To Stop AN Automatic Timer PRO- Gram Already Started

WF802 specifications

The Symphonic WF802 is a cutting-edge wireless headphone model that has made a significant impact in the realm of personal audio. Designed for audiophiles and casual listeners alike, the WF802 offers an impressive array of features and technologies that enhance the listening experience while prioritizing comfort and style.

One of the standout characteristics of the Symphonic WF802 is its advanced noise-canceling technology. By employing adaptive noise cancellation, the headphones can effectively filter out ambient sounds, allowing users to immerse themselves in their music without distractions. This is particularly beneficial for those who travel frequently or work in noisy environments, as it ensures crystal-clear audio regardless of external conditions.

The WF802 is equipped with high-fidelity audio drivers that deliver a deep, rich sound profile. With a wide frequency response, from deep bass to soaring highs, these headphones cater to various musical genres, ensuring that every note and beat is reproduced with precision. The headphones also feature a built-in equalizer, allowing users to customize their audio settings based on their preferences.

Comfort is another priority with the Symphonic WF802. Featuring plush ear cushions and an adjustable headband, these headphones are designed for extended wear without discomfort. The lightweight construction adds to the overall user experience, making them suitable for long listening sessions, whether at home or on the go.

In terms of connectivity, the WF802 utilizes Bluetooth technology for seamless pairing with smartphones, tablets, and other devices. This wireless feature allows for a tangle-free experience, enhancing portability. Additionally, the headphones support voice assistants, enabling users to control their devices hands-free, which is a notable convenience.

Battery life is a crucial consideration for wireless headphones, and the Symphonic WF802 does not disappoint. With an impressive playtime of up to 30 hours on a single charge, users can enjoy their favorite tunes without constantly worrying about recharging. The quick charge feature further enhances usability, allowing for multiple hours of playback after just a short charging period.

Lastly, the aesthetic appeal of the Symphonic WF802 cannot be overlooked. With a sleek design and a choice of stylish colors, these headphones not only perform well but also look great while doing so.

Overall, the Symphonic WF802 combines advanced technology, exceptional audio quality, and user-centric design, making it a top choice for anyone seeking a premium headphone experience.