Safety Precautions
To protect yourself from injuries and avoid damage of the SysKonnect
Avoiding Injuries
Electrical current!
Electrical current from power, phone, and communications cables can be hazardous.
Never touch any electrical elements with bare hands.
To avoid potential shock hazards:
•Do not carry out any installation, maintenance, or (re)configuration work during a thun- derstorm.
•Do not connect or disconnect any power cables during a thunderstorm.
•Unplug this device from its power source before cleaning. Use only a slightly dampened cloth for cleaning. Do not use liquid or aerosol cleaners.
•Do not use this product near water.
•This device should only be used with the power supply type specified on the marking label. If you are not sure of the type of your local power supply, consult your dealer or the local power company.
•Do not pinch, crimp or otherwise damage the power cord. For transportation, ensure that the cable is properly shielded and does not pose a tripping hazard.
•If using an extension cord, make sure the total ampere rating of the products using the cord does not exceed the extension cord's ampere rating.
•Do not attempt to service this device, as opening or removing the casing may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service person- nel.
•Do not touch or move antenna while the unit is transmitting or receiving.
•Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.
•The SysKonnect
•The power cord is damaged or frayed.
•Liquid has been spilled onto the product.
•The product has been exposed to rain or water.
•The product does not operate normally in accordance with the operating instruc- tions.
•The device has been dropped or the casing has been damaged.
Electrical installations must comply with the safety regulations of the country in which they are
i operated.
Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use.