
12 | Safety Precautions |
Avoiding Damage
Electrostatic discharge!
Electrostatic discharge may damage or destroy the SysKonnect
To avoid damaging the SysKonnect
•Never use force when working with the SysKonnect Cardbus Adapter.
•Do not place the SysKonnect Cardbus Adapter on an unstable surface. The device may fall causing serious damage to the device.
•Avoid unnecessary movement since this can increase electrostatic charge.
•Use in specific environments:
•The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.
•The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
Regulations of the FCC and the Federal Aviation Administration (FAA) prohibit airborne operation of
FCC Safety Notices
The FCC in ET Docket
This product has passed all necessary tests that classify the product as a mobile device that can be operated in close proximity to the human body.
The device is approved for mobile and laptop computer use with similar installation and operating configurations. The SysKonnect Cardbus Adapter is a wireless device with an integrated antenna. To comply with the FCC and ANSI C95.1 RF exposure limits when using such a wireless device inserted into a laptop computer, it is recommended that the antenna should not be positioned closer than 5 cm (2 inches) from the body or nearby persons. It is recommended that the user limit exposure time if the antenna is positioned closer than 5 cm (2 inch- es).
The device must not be